|
|
| |
|
huskereuroca |
 General Member |
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
2:49:19 AM |
IP Logged |
|
From the other comments given I may be the only one having this issue, but there seems to be a sharp ridge run through the green on hole #3. It may need some smoothing out.
I wish that I could take a snapshot of what is going on. (did I mention that I hate win 10) I have a shot right now where I am standing on the side of the green with a chip shot and I am standing on a ridge that needs to be smoothed out.
This is a awesome course, but just needs a little fix.
Thanks
|
| |
| |
|
|
| |
|
|
| |
|
Gunpower61 |
 Site Admin |
|
Belgium |
| |
| Joined: 12/9/2004 |
|
B-Day: 4/30/1961 (64) |
|
Posts: 4,236 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
8:30:53 AM |
IP Logged |
|
Hiya Kelly, i believe it happens when your ball is close to the structures that are close to the green.
I don t think there is a problem with the course.
There are a few structures around the green on hole 3, you probably see a part (or lines) of the structures.
When you have the problem again, then you can adjust the camera view a bit.
For example try to change the camera view a bit with the W and S key on your keyboard. |
| |
| |
|
|
| |
|
|
|
| |
|
huskereuroca |
|
General Member |
|
|
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
8:35:24 AM |
IP Logged |
|
|
"Hiya Kelly, i believe it happens when your ball is close to the structures that are close to the green.
I don t think there is a problem with the course.
There are a few structures around the green on hole 3, you probably see a part (or lines) of the structures.
When you have the problem again, then you can adjust the camera view a bit.
For example try to change the camera view a bit with the W and S key on your keyboard." |
But when I putt the ball, it jumps the bump. Is that normal? I've never had it happen on any other course. |
| |
| |
|
|
| |
|
|
|
| |
|
Gunpower61 |
|
Site Admin |
|
|
|
Belgium |
| |
| Joined: 12/9/2004 |
|
B-Day: 4/30/1961 (64) |
|
Posts: 4,236 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
8:47:25 AM |
IP Logged |
|
Weird, i don t have that problem, tried to play the green from all positions and works fine here.
Did you try to reinstall the course ? |
| |
| |
|
|
| |
|
|
|
| |
|
huskereuroca |
|
General Member |
|
|
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
8:54:06 AM |
IP Logged |
|
| Installed on a different PC so don't know yet. I'll try that. |
| |
| |
|
|
| |
|
|
|
| |
|
huskereuroca |
|
General Member |
|
|
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
1:58:58 PM |
IP Logged |
|
|
| "Installed on a different PC so don't know yet. I'll try that." |
I have now tried this on my desktop and laptop and both have the same issue. Take a look at the attached pics. (prtsc actually works on my laptop)
In first pic if you look to the left you can see a major crease.
In the second you can see a crease off the left on the green.
In the third you can see the crease in front of the ball. In getting the ball in that position. I putted the ball to that point and in did a hop and stopped at the bottom of the crease. In other words my ball would have to hop over the crease to get to the hole. Not a major issue but probably just needs to be smoothed a little bit. It may be an intentional change in elevation that just didn't get completely smoothed out.
|
| |
|
|
| |
|
|
| |
|
|
|
| |
|
huskereuroca |
|
General Member |
|
|
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
2:00:36 PM |
IP Logged |
|
The second pic................
|
| |
|
|
| |
|
|
| |
|
|
|
| |
|
huskereuroca |
|
General Member |
|
|
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Sunday, August 21, 2016 at
2:02:17 PM |
IP Logged |
|
And the third.................
|
| |
|
|
| |
|
|
| |
|
|
|
| |
|
huskereuroca |
|
General Member |
|
|
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Tuesday, August 23, 2016 at
12:52:51 PM |
IP Logged |
|
Is this being fixed or am I the only one that sees this?
Here is a shot with the pin in a different position and the crease is right between the hole and the ball. I have not seen this anywhere else on the course.
I'd like to add that this is just an awesome course. The visual appeal of this course is spot on. |
| |
|
|
| |
|
|
| |
|
|
|
| |
|
Gunpower61 |
|
Site Admin |
|
|
|
Belgium |
| |
| Joined: 12/9/2004 |
|
B-Day: 4/30/1961 (64) |
|
Posts: 4,236 |
| |
|
| |
| Posted: Tuesday, August 23, 2016 at
1:10:53 PM |
IP Logged |
|
Hiya Kelly, after a close look i found what you see on the pic.
So you are not the only one that will see it, but i never had problems on the green, maybe i was lucky my ball didn t land on that spot.
|
| |
| |
|
|
| |
|
|
|
| |
|
huskereuroca |
|
General Member |
|
|
|
United States of America |
| |
| Joined: 4/11/2010 |
|
B-Day: 11/14/1963 (61) |
|
Posts: 348 |
| |
|
| |
| Posted: Tuesday, August 23, 2016 at
2:44:56 PM |
IP Logged |
|
|
"Hiya Kelly, after a close look i found what you see on the pic.
So you are not the only one that will see it, but i never had problems on the green, maybe i was lucky my ball didn t land on that spot.
" |
Thanks, I thought I was the only one seeing it and losing the last strand of sanity that I have.
That tourney is a ways off in Foggy's career, so there is plenty of time for the team to look at it. |
| |
| |
|
|
| |
|
|
|
| |
|
Hyno Designs |
|
General Member |
|
|
United States of America |
| |
| Joined: 10/24/2004 |
|
B-Day: 10/30/1976 (48) |
|
Posts: 752 |
| |
|
| |
| Posted: Tuesday, August 23, 2016 at
6:31:04 PM |
IP Logged |
|
| edited by: Hyno Designs on
Wednesday, August 24, 2016 at
12:19:00 AM
|
| |
This is a very common problem; it can happen on every hole if you don''t know the technique to fix it. If you play on HD graphics you will see more of this cause the picture is more detailed. Even with the smoothing technique they can still show up from time to time.
Basically what happens you pick up a texture or move a texture and it creates rips in the seems between textures. |
| |
| |
|
|
| |
|
|
|
Post Reply
New Topic
